Home  <  Dental Professional  <  Orthodontic Screw
D ø1.4
  1.5
6 OSSH1406
8 OSSH1408
D ø1.6
  1.5
6 OSSH1606
8 OSSH1608
10 OSSH1610
  • ㆍPacking unit : O-ring 5 piece
D ø1.8
  1.5
6 OSSH1806
8 OSSH1808
10 OSSH1810
  • ㆍMachined Surface
  • ㆍMaterial : Ti-6AI-4V
D ø1.4
  1.5
6 OSTH1406
8 OSTH1408
D ø1.6
  1.5
6 OSTH1606
8 OSTH1608
10 OSTH1610
  • ㆍPacking unit : O-ring 5 piece
D ø1.8
  1.5
6 OSTH1806
8 OSTH1808
10 OSTH1810
  • ㆍMachined Surface
  • ㆍMaterial : Ti-6AI-4V
  • ㆍThrough Hole size : ø0.8
D ø1.4
  1.5
6 OSBH1406
8 OSBH1408
D ø1.6
  1.5
6 OSSHS1606
8 OSSHS1608
10 OSSHS1610
  • ㆍPacking unit : O-ring 5 piece
D ø1.8
  1.5
6 OSTHS1806
8 OSTHS1808
10 OSTHS1810
  • ㆍMachined Surface
  • ㆍMaterial : Ti-6AI-4V
  • ㆍHead diameter : Ø1.48
D ø1.4
  1.5
6 OSBH1406
8 OSBH1408
D ø1.6
  1.5
6 OSBH1606
8 OSBH1608
10 OSBH1610
  • ㆍPacking unit : O-ring 5 piece
D ø1.8
  1.5
6 OSBH1606
8 OSBH1608
10 OSBH1610
  • ㆍMachined Surface
  • ㆍMaterial : Ti-6AI-4V
  • ㆍSuperior compatibility with various arch wires
D ø1.4
  1.5
6 OSTH1606E
8 OSTH1608E
10 OSTH1610E
  • ㆍMinimizes possibility of early failure
  • ㆍMaterial: Ti-6Al-4V
  • ㆍIdeal for cases where the patient is a child/adolescent or has poor bone quality
Code OOKS
  • ㆍA surgical KIT for use an orthodontic treatment

  •    KIT Components (basic)
  • ㆍ2-drill set
    -ø1.3 Drill
    -ø1.5 Drill

  • ㆍ2-drill set
    -ø1.3 Drill
    -ø1.5 Drill

  • ㆍ4-driver set
    - Driver Tip (Hex Type)
    - Machine Driver (Hex Type)
    - Driver Tip (Hex Type)
    - Hand Driver (Hex Type)

  • ㆍ2-handle set
    - Universal Handle
    - Driver Handle

  • ㆍKIT Components (optional)
    - Machine Driver (Cross Type)
    - Hand Driver (Cross Type)

D ø1.3 ø1.5
Code OSODR130C OSODR150C
  • ㆍLaser marking has been appeared for 6, 8, 10, 12 and 14 mm.
  • ㆍFor ø1.6mm screw surgery, use ø1.3mm drill and for ø1.8mm screw surgery, use ø1.5mm drill, respectively to drill only cortical bone or drill according to the length of an orthodontic screw.
Code OUH
  • ㆍUse after connecting with a driver tip
  • ㆍEasy to use, the middle of the handle part has knurling treatment
Type Hex Cross
Short Long
L 70 70 69
Code OSDTS OSDT OCDT
  • ㆍUse for the placement of orthodontic screws by coupling with the universal handle
  • ㆍHex and cross types are available, use the hex type for applying torque, and the cross type for correcting the through hole path of the screw


    (Caution) Do not apply excessive torque with the cross type driverM
Type Hex Cross
Short Long
L 23.4 33.4 26.4
Code OSMDA OSMDB OCMD
  • ㆍUse for the placement of orthodontic screws by coupling with the universal handle
  • ㆍHex and cross types are available, use the hex type for applying torque, and the cross type for correcting the through hole path of the screw


    (Caution) Do not apply excessive torque with the cross type driver
Code TIDHC
  • ㆍUse for connecting a hand driver and for the manual tightening of screws
Type Hex Cross
Code OSTDA OCHD
  • ㆍUse for the orthodontic screw insertion or removal by connecting to a driver handle and torque wrench
  • ㆍHex and cross types are available, use the hex type for applying torque, and the cross type for correcting the through hole path of the screw


    (Caution) Do not apply excessive torque with the cross type driver
Code OSST75
  • ㆍIf the driver is not removed after implantation of an orthodontic screw, insert a driver separator in the hole at the front part of the driver and remove the screw with lever action.